If you searching for the Realme 6i RMX2002 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Realme 6i RMX2002 , Here you can download the Official Realme 6i RMX2002 Stock Firmware ROM (flash file) on your Computer
Download Realme 6i RMX2002 Stock Rom (Original firmware)
- Flash File Name: realme 6i, Realme 6S, realme Narzo 10 RMX2002.rar
- Flash File Size: 4.00 GB
- Flash Tool Link: Realme Flash Tool
- Download File: Download Realme 6i RMX2002 Flash File
How to Flash Realme 6i RMX2002 Stock Firmware ROM
Requirements: Your Realme 6i RMX2002 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Step 1: Put your Realme phone into Bootloader mode by turning off the power then holding down the volume up and down keys at the same time until the logo appears, then release. Then connect the phone to the computer using the prepared USB cable.
Step 2: Launch the flash_tool tool, in the main interface at Scatter-loading File click the Choose button then find and open the folder received after extracting the ROM and select the file named scatter.txt.
Next, click the Choose button of the Authentication File section, look in the ROM folder and select the .auth file format.
Continue to remove the check mark in 2 lines oppo reserve2 and cdt_engineering.
Step 3: Keep the flash_tool tool interface intact, find and launch the MTKAuthBypassToolV11 tool, click Disable auth and return to the flash_tool tool and click the Download button.
Immediately then hold down the volume up and down keys at the same time waiting for the progress bar [recovery] Download flash to turn yellow, then release and wait for the process to complete (about 15 minutes).
If the above operation fails, repeat step 3 until it succeeds.
When the Download OK pop-up is done, you can unplug the cable and start the phone to check that the new ROM has been installed. Good luck!
Good luck
