If you searching for the 5STAR Z22 J3 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on 5STAR Z22 J3 , Here you can download the Official 5STAR Z22 J3 Stock Firmware ROM (flash file) on your Computer
Download 5STAR Z22 J3 Stock Rom (Original firmware)
- Flash File Name: 5STAR Z22 J3 – 2.3.5_SC6820_V05_20170216.rar
- Flash File Size: 116.1 MB
- Flash Tool Link: SPFlash Tool
- Flash-Guide: Use SPFlash Tool Software to Flash the firmware.
- Download: Download 5STAR Z22 J3 Flash File
How to Flash 5STAR Z22 J3 Stock Firmware ROM
Requirements: Your 5STAR Z22 J3 Device should have at least 40-50 percent of battery to perform the Flashing Process.
– Turn off the phone completely and Remove the battery if removable.
– Download the 5STAR Z22 J3 Stock Rom (original) that you want to Flash for your phone to your computer and extract it.
– Extract the SP Flashtool downloaded above and run the file flash_tool.exe
– Select 5STAR Z22 J3 Scatter-loading, navigate to the ROM folder, select the file MT6572_Android_scatter_emmc.txt
Click Download and remove the battery and reinsert (do not turn on the power) press the Volume Up or Volume Down key to let the computer receive the Driver and plug in the cable to receive the phone, then the software will automatically load the ROM
Note: (Uncheck Preloader (Because if it’s running, it cuts off the power or drops the cable to determine HARD BRICK) So if you have a laptop, it’s safer to run with a laptop.
Wait for it to load as shown (yellow line)
After a few minutes, when the rom is successfully uploaded, it will say Download OK, the rom up process has been 100% successful, unplug the cable and restart the phone.
Or successful new notification interface
Good luck
